G1208 WiFi Extender, 1200Mbps WiFi Repeater Wireless Signal Booster, 2.4 & 5GHz Dual Band WiFi Extender with Ethernet Port, 360 Degree Full Coverage

The G1208 WiFi Extender is a device that can increase the coverage of your wireless internet connection. It has a dual-band technology that automatically chooses the best quality band for better performance. It can offer up to 300Mbps for the 2.4GHz band and 867Mbps for the 5GHz band, yielding a maximum of 1167Mbps. This maximizes the reduction of data transmission loss.

The device has a wall-plug design that is compatible with any WiFi router. It has four external antennas to ensure a strong and stable signal. The setup process is quick and easy with an intelligent signal indicator LED ring. The extender can be set up through a browser-based configuration on almost any device, including iOS and Android mobile platforms.

In terms of security, the extender supports WPA and WPA2 wireless connection and enables wireless security encryption.

The device’s specifications include 4*2dBi External Omni-directional Antenna, IEEE802.11ac/a/b/g/n wireless standard, 20/40/80 MHz Auto channel bandwidth, and WPA-PSK/WPA2-PSK; WPA/WPA2 encryption. It operates at a frequency of 2.412 ~2.472GHz and 5.180~5.825GHz. The device’s output power is 100mW (20dBm), and the receiver sensitivity (max) is -96dBm. The extender runs on a power range of 100~240V, 50/60HZ.

In case you need to reset the device or restore it to its factory default settings, put the power button to “on,” and the Mode Selector in “Repeater” side. Plug the extender into a socket while the power LED and WiFi signal indicator lights up. Then, use the sim card removable needle (including in the package) to press the reset button for 3-6 seconds. Wait for several seconds, and the LED lights turn on momentarily. Then, you can configure the extender again.

If your extended network does not have internet access after setting up the extender, it could be due to the wrong router WiFi password entered during installation. Hence, you need to reset the extender and go through the configuration process again. Other factors that could affect the network include the router’s distance, which may be too far from the extender. In such a case, you need to adjust your extender to an ideal location.

The package comes with a WiFi Range Extender, Quick Installation Guide, and RJ45 Cable. The device’s current price is undisclosed, and you can purchase it on Amazon.