As an Amazon Associate I earn from qualifying purchases

Antakipro AP-410 4-Channel 5780W 4-Ohm Bridge DJ Amp

Add your review

$2,280.00









Price: $2,280.00
(as of May 21,2023 09:44:09 UTC – Details)


The Antakipro AP-410 is a high-power audio amplifier suitable for stage or club settings. With a compact steel frame, the amplifier is shockproof and has compressive resistance. The amplifier features intelligent soft boot, sophisticated short-circuit, overload, and overheat protection. It also has a built-in low-frequency exciter and can work in stereo, parallel, and bridge modes. The amplifier can operate under voltages of 60V to 400V.

The amplifier has a power correction factor of cos (f) >0.95 @ >500 W and a standby power consumption of 47W and 0.8A. The gain sensitivity can be adjusted to 32dB, 35dB, 38dB, and 41dB. It has a maximum output voltage/current of 185V/85A (370V in the bridge mode) and operates at an operating temperature of 0 Degrees – 45C / 32 Degrees – 113 Degrees F. The amplifier features a tunnel-through cooling system and has a frequency response of 20 Hz – 20 kHz (+/- 0.5 dB).

The signal-to-noise ratio of the amplifier is >110 dBA (20 Hz – 20 kHz, A weighted), and the crosstalk is >66 dB @ 1 kHz. The input impedance of the amplifier is 10 k Ohms balanced, and the total harmonic distortion is <0.5% from 1 W to full power (typical value <0.05%). The amplifier has a damping factor of >5000 @ 20 – 200 Hz and a slew rate of 50 V/microseconds @ 8 Ohms.

The front panel of the amplifier features one PCS green LED, the input signal of XLR = – 40dB, and four pieces of green LED indicator LED per channel that displays the output signal (- 20dB, – 10dB, – 5dB, – 3dB) of SPEAKON. It also has one piece of dual LED (Yellow and Red) that indicates the protective state/clip state/overheat/overload. The LED screen displays the per channel operation mode, including mono mode, bridge mode, and stereo mode, and the temperature of the equipment.

The amplifier dimensions are 18.98 x 1.73 x 18.5 inches, and it weighs 30 pounds. The item model number is AP-410, and it is made by ANTAKIPRO. The ASIN is B0C3P8F65H, and the country of origin is China.

According to the EIAJ test standard, the amplifier can output 4 x 1000 Watts @ 8 Ohms, 4 x 1700 Watts @ 4 Ohms, 4 x 2890 Watts @ 2 Ohms, 2 x 3400 Watts 8 Ohms Bridged, and 2 x 5780 Watts 4 Ohms Bridged. It has a 1/8 maximum power output in 4 Ohms of 1020 Watts, 6A 4 Channel, and 1020 Watts, 10.8 Amps Bridged. It also has a 1/4 maximum power output in 4 Ohms of 1800 Watts, 9.36 Amps 4 Channel and 1800 Watts, 24.96 Amps Bridged.

The amplifier has two channels: one balanced XLR (with lock) female per channel, and one balanced XLR male per channel. The signal-out connection is one SPEAKON per channel connection to loudspeakers. The power cord is 1.5 meters long, and the amplifier has a multiple-functions switch, two sensitivity switches, one mode switch, and one clip switch. The dimensions are 482 x 44 x 380mm / 482 x 44 x 470mm, and the net weight is 10Kg/12Kg (22.04 -26 lbs). The packing size is 580 x 580 x 119mm / 615 x 615 x 119mm, and the shipping weight is 12Kg/14Kg.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Antakipro AP-410 4-Channel 5780W 4-Ohm Bridge DJ Amp”

Your email address will not be published. Required fields are marked *

$2,280.00

Add to wishlistAdded to wishlistRemoved from wishlist 0
Top offers
Antakipro AP-410 4-Channel 5780W 4-Ohm Bridge DJ Amp
Antakipro AP-410 4-Channel 5780W 4-Ohm Bridge DJ Amp

$2,280.00

epiui
Logo
Enable registration in settings - general